Would you like high pressure hot water coming out of all your taps and shower at 30 Litres per minute!?
Megaflows; If so, you might want to think about fitting a Megaflow, an un-vented hot water cylinder into your property or business.
A Mega flow is a type of unvented hot water cylinder made by Heatre Sadia a bit like how most people refer to a Vacuum cleaner as a Hoover!
It is basically stored hot water at mains pressure in most cases heated by a gas boiler but can also be heated by electric immersion heaters or by renewable sources.
The difference between this method and a combination boiler is that a combi boiler does not have any stored water capacity and therefore can only deliver flow rate at a limited amount, no more than around 16 litres per minute.
With an unvented cylinder this flow rate to the hot taps can in most cases be the same flow rate as the water coming out of your kitchen cold tap fully open!
If this is what you are looking for there are a number of things to check to ensure this type of system will suit you.
Megaflows: The main two considerations are:
- Do you have good mains water pressure coming into your property?
- Is there somewhere a hot water cylinder can be sited?
If the answer is yes to either of these then this could be your chance to have high pressure water to every tap and shower in your house!
If you‘re interested in improving the hot water performance in your home we’ll happily visit your property free of charge and advise you whether this is the best option for you.